• Store each compatible group in separate cabinets, or separate them from other chemical groups with tubs (e.g., Polypropylene "Nalgene") or secondary containers.
• Label storage cabinets and tubs by compatibility group. For example, label a tub containing hydrochloric acid, sulfuric acid, and phosphoric acid "Mineral (Inorganic) Acids."
• Never store flammable liquids in a standard or domestic refrigerator or freezer. They have numerous ignition sources that could ignite vapors. Flammable liquids that must be chilled or frozen require special flammable storage refrigerators or freezers to minimize the risk of fire or explosion.
• Keep containers capped and closed when not in use.
• Place hazardous materials on lower shelves. Don't store them overhead. Use seismic restraints to prevent containers from "walking off" open shelves during earthquakes.
• Protect drains from chemical spills. Don't use sinks for chemical storage or secondary containment.

  Back to top

• Choose sturdy, sealable storage containers made of material compatible with the chemical they'll hold.
• Contact an EH&S Research Assistance Program specialist if you have questions about chemical and container compatibility.

  Back to top

• Accurately label chemicals transferred from their original containers with the following required information, written legibly:
  • Chemical name or abbreviation
  • Concentration
  • Hazard warning
• Include the following additional information required for chemicals that degrade over time, peroxide formers, and air and water reactives:
  • Date received
  • Date opened
  • Date tested
• Prominently post a chemical abbreviation sheet in the lab when abbreviations are used on labels.
  • Print out this list (PDF) (Word) of common substances and abbreviations. Extend the list as necessary with your lab-specific abbreviations.
• Label refrigerators used for chemical storage with a "No Food Storage" sticker. Label refrigerators that are not approved flammable storage units with a "No Flammable Storage" sticker.
  • Print out lab safety labels.
  • Read about Special Refrigerators for Flammable Liquids Storage.

  Back to top

• Follow these guidelines for any materials below used in your facility:
  • Chemical carcinogens
  • Compressed gas
  • Controlled substances
  • Flammable liquids
  • Organic-peroxide-forming materials
  • Select Agents
  • Radioactive materials
• Know your building's limitations regarding high-hazard materials. Some hazardous materials may not be used in buildings without sprinklers (e.g., pyrophoric material – alkyllithiums, alkylzincs, alkylmagnesiums, diborane, arsine, phospine, etc.).
• Maintain Class D fire extinguishers for work with flammable metals:
  • Flammable metals such as lithium, sodium, potassium, magnesium, etc.
  • Flammable metal compounds such as butyllithium, diethylzinc, lithium aluminum hydride, etc.
  Note: These types of materials react violently with water!
• Contact the EH&S chemical safety officer with questions.

  Back to top

• Identify Hazardous Chemical Waste
• Store and Dispose of Hazardous Chemical Waste

  Back to top

• Include the following in your inventory records:
  • Chemical name
  • Abbreviations your lab or shop uses for chemical agents
  • Quantity of chemical stored
  • Chemical Abstract Number (CAS #)
  • Compatibility group
• Chemicals that degrade over time require additional record-keeping. These include peroxide formers, air and water reactives, and other time-sensitive materials.
  • Carefully track the date received, opened, and tested.
  • Read Organic-Peroxide Formers Overview for complete information on identifying, storing, and testing organic-peroxide-forming chemicals.
  Note: You may need to verify your chemical inventory periodically with Environment, Health & Safety (EH&S) and during regular audits.

  Back to top

• Avoid duplicative inventory orders.
• Order the minimum quantity of chemicals you need for the near future. Don't stockpile chemicals.
  • A 6-month throughput of material is a good ordering target.
• Conserve resource funds:
  • Check the ChemCycle inventory of over 6,000 chemicals before you order from suppliers. Follow instructions on the ChemCycle Web page to search for and request free chemicals.
  • Donate usable surplus chemicals to ChemCycle:
  • Request a Hazardous Waste Collection, identifying the chemicals to be collected.
  • Write "FOR CHEMCYCLE" on the chemical container's waste tag.
  • EH&S technicians pick up the container on the next scheduled hazardous waste collection for your building.
• Reduce your stored chemical supplies to keep your facility fire code compliant. Overstock and bulk orders have negative effects on the entire facility. It can:
  • Lead to fire codes violations by exceeding the exempt amount of hazardous materials for your facility
  • Limit storage space for colleagues sharing the facility
  • Increase safety hazards and risks
• Promptly dispose of unwanted chemicals through the EH&S Hazardous Waste Program at no charge to the researcher.

  Back to top

Read about how the CFC affects chemical storage and inventories below:

• These variables determine chemical allowances for each building:
  • Building occupancy
  • Exempt amount (or maximum allowable quantity)
  • Control areas
  • Mitigating circumstances
• Fire code limits differ by building, building floor, or a defined storage area in some cases, and are subject to many variables.
• For more information about chemical storage limitations for your facility:
  • If you are a research employee, contact the EH&S Research Assistance Program specialist assigned to your building.
  • If you are a non-research employee, contact an EH&S general safety specialist, (858) 534-7513.

  Back to top

UC San Diego’s Hazardous Materials Business Plan (HMBP):

• Provides valuable information for local fire and hazmat departments responding to emergencies on campus
• Helps UCSD achieve chemical inventories within allowable fire code limits
• Encourages discovery and proper disposal of degraded or unwanted chemicals

Hazardous materials are inventoried for the HMBP if the substance is used, handled, or stored in quantities greater or equal to the following:

• Listed extremely hazardous materials (40 CFR Part 355, appendix A), including poisons, oxidizers, teratogens, etc.
• Any compressed gas
• 250 grams of solid substance
• 100 milliliters of liquid substance

What to expect:

• EH&S HMBP technicians perform scheduled annual chemical inventories that include:
  • Checking barcodes in the database
  • Visual confirmation of inventory
  • Consultation with the lab or shop contact to determine if there have been major changes
  • Checking for a 2-fold increase or decrease in any 1 hazard class
• During inventory, EH&S technicians can assist with donation of surplus or legacy chemicals to ChemCycle.
• When completed, the lab or shop's principal investigator and Area Safety Coordinator receive an electronic copy of their inventory.
• When EH&S technicians find chemical inventories unsafe or out of compliance with fire codes, EH&S notifies:
  • The UCSD department with oversight of the facility
  • UCSD's Chemical Safety and Surveillance Committee
  • UCSD's fire marshal and the state fire marshal

  Back to top